Industrial inspection
Thickness measurements, defect mapping, inspection campaigns and traceability, from field readings to a defensible audit trail.
Articles on industrial inspection
Industrial inspection
AI in non-destructive testing: what AI adds to NDT
What artificial intelligence really adds to non-destructive testing: assisted defect detection on images, structured results, trending, and its honest limits.
Industrial inspection
Preparing for a technical or regulatory audit: arrive with a history, not a pile of PDFs
Approach a technical or regulatory audit without losing two days: what the auditor really looks for, and how to keep a history that answers on its own.
Industrial inspection
How to calculate a corrosion rate: formula, unit and pitfalls
The corrosion rate formula from dated thickness readings, the unit to use, and the difference between short-term and long-term rates explained.
Industrial inspection
Equipment inspection intervals: what regulation fixes, and what it leaves to you
What the rules really impose as inspection intervals, how an interval is calculated, and the risks no wall thickness measurement will ever see.
The field toolbox
- Corrosion ratemm/yr
- MTBF · MTTR · uptimereliability
- Thickness logtrend
- Inspection intervaldue date
- Report templateCMMS
- Unit convertermm · psi
- Lost hoursROI
No account, everything runs in the browser.
Open the tools
Industrial inspection
Ultrasonic thickness measurement: where to place CMLs and how to hold them
Where to place thickness monitoring points based on the damage mechanism, how many to set, and how to guarantee you re-measure the exact same spot.
Industrial inspection
Risk-based inspection (RBI) explained to the people who have to apply it
What risk-based inspection actually is, how probability and consequence of failure are built, and what you need in hand before you start.
No article matches this search.